NHPREPNETWORKERSHOME

Public

HomeBrowse CoursesLabsLessonsQuiz
CCNA Complete CourseBack
Lesson 1 of 25

Day 1 - Introduction to Cisco and CCNA

Practice with Hands-On Labs

30 step-by-step labs for CCNA, CCNP Enterprise & Security

Course Content

1
Day 1 - Introduction to Cisco and CCNA
2
Day 2 - Introduction to Cisco and Network Components
3
Day 3 - Network Topologies and Communication Modes
4
Day 4 - Logical vs Physical Addresses, IPv4 Features
5
Day 5 - Subnet Masks and IP Address Classes
6
Day 6 - Classful/less Subnetting and DHCP Configuration
7
Day 7 - TCP, UDP, and Router Components
8
Day 8 - TCP/UDP Protocols: Connection and Communication
9
Day 9 - ICMP, PING, Trace Route Fundamentals
10
Day 10 - Default Gateways, Telnet, and SSH Protocols
11
Day 11 - Routing Protocols: Static, Default, Dynamic
12
Day 12 - Static Route Configurations and Challenges
13
Day 13 - OSPF Packet Types and Neighbor States
14
Day 14 - ACL Types and Traffic Filtering
15
Day 15 - HRP, VRRP, GLBP Redundancy Protocols
16
Day 16 - IP Translation: Static, Dynamic, PAT
17
Day 17 - DHCP Protocol and Message Exchange
18
Day 18 - Switch, VLAN, and Port Types Review
19
Day 19 - Trunking, DTP, and BTP Protocols
20
Day 20 - STP Functionality and Root Bridge Selection
21
Day 21 - EtherChannel and LACP, PAGP Protocols
22
Day 22 - DHCP Relay, Snooping, and SNMP Overview
23
Day 23 - IPv6 Address Types and Campus Networks
24
Day 24 - WAP Types and Wireless Networking
25
Day 25 - QoS Traffic Prioritization and VPN Basics